Original Article ID: 3474

SUMMARY

The purpose of this article is to show you how to use Eco Mode on a Yealink W52

Scope

This article applies to:
Yealink W52

This article 
does not apply to:
Any other phones / devices

Feature

Eco Mode

Eco mode greatly reduces the transmission power and signal output when the phone is in the talk mode. The attenuation range is 20m. When the distance between the base station and the handset is over 20m, the eco mode is disabled automatically.


To configure eco mode via the handset:

  1. Pressto enter the main menu.
  2. Select->System Settings->Eco Mode.
  3. Press the Change soft key to check or uncheck the Eco Mode checkbox.
    If the Eco Mode checkbox is checked, the eco mode is enabled. The color of the signal
    strength indicator on the idle screen will change from white to green.

Note: If the eco mode is enabled, the coverage area of the base station will be reduced.

Eco Mode+

Eco mode+ turns off the transmission power and the radio waves emitted are virtually zero when the phone is in the standby mode. If the eco mode+ is enabled, and there is no signal interaction between the handset and the base station, the color of the signal strength indicator on the idle screen will display in green. When a call comes in or a connection occurs, the phone exits the eco mode+ automatically, and the signal strength indicator on the idle screen changes from green to white.


To configure eco mode+ via the handset:

  1. Pressto enter the main menu.
  2. Select->System Settings->Eco Mode+.
  3. Enter the system PIN (default: 0000 or 9871) and press the Done soft key.
    The LCD screen prompts “Setting takes effect after base reboot. Reboot now or not?”.
  4. Press the Yes soft key to reboot the base station.
    The base station reboots to make the configuration take effect. The configuration
    applies to all the handsets registered to the base station.

Related Articles

- Yealink W52 Phone Settings Table, Article 3434