Original Article ID: 3446

Summary

The purpose of this article is to explain how to change the Ring Tones on the Yealink

Scope

This article applies to:
Yealink W52

This article 
does not apply to:
Any other phones / devices

Feature

 

Ring tones are used to indicate incoming calls. You can set different ring tones to distinguish the incoming lines from each other on your handset. You can also set a ring tone for an incoming intercom call. When receiving an incoming call, the handset rings the specified ring tone.


To configure ring tones via the handset:
1. Press  to enter the main menu.
2. Select  ->Audio->Ring Tones->Melodies.
3. Press  or  to highlight the Intercom Call option or the desired line.
4. Press  or to select and listen to the desired ring tone.
5. Press the Save soft key to accept the change or the Back soft key to cancel.


To adjust ringer volume using the menu via the handset:
1. Press to enter the main menu.
2. Select ->Audio->Ring Tones->Volume.
3. Press or to decrease/increase the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.

 

Related Articles

- Yealink W52 Phone Settings Table