Date and time are displayed on the idle screen of your handset. The handset obtains the date and time from the Simple Network Time Protocol (SNTP) server by default. If your handset cannot obtain the date and time from the SNTP server, you need to configure the date and time manually.

You can configure the time format and date format respectively. The handset supports two time formats (12 Hour or 24 Hour) and seven date formats. The available date formats are listed in the following table:

Date Format Example (2014-5-28)
WWW MMM DD Wed. May 28
DD-MMM-YY 28-May-14
YYYY-MM-DD 2014-05-28
DD/MM/YYYY 28/05/2014
MM/DD/YY 05/28/14
DD MMM YYYY 28 May 2014
WWW DD MMM Wed. 28 May

To configure date and time manually via the handset:

  1. Press OK to enter the main menu.
  2. Select Settings > Date & Time.
  3. Edit the current values in the Date and Time fields respectively.
  4. Press the Save soft key to accept the change.
    The date and time displayed on the LCD screen will change accordingly.

To configure the time format via the handset:

  1. Press OK to enter the main menu
  2. Select Settings > Display > Time Format
  3. Press Up or Down to highlight the desired time format
  4. Press the Change soft key.
    The radio box of the highlighted time format is marked.

The time format displayed on the LCD screen will be changed accordingly.