Original Article ID: 3452

Summary

The purpose of this article is to explain how to configure the Notification Light on the Yealink

Scope

This article applies to:
Yealink W52

This article 
does not apply to:
Any other phones / devices

Feature

 

Notification light is used to indicate voice mails and missed calls. When the handset receives a voice mail or misses a call, the message key LED flashes red. You can configure the notification light to indicate the voice mails or missed calls respectively.


To configure notification light via the handset:

  1. Press to enter the main menu.
  2. Select ->Display->Notification Light.
  3. Press  or  to select the desired value from the Voice Mail field.
    If Enabled is selected, the message key LED flashes red when the handset receives a voice mail.
    If Disabled is selected, the message key LED won’t flash when the handset receives a voice mail.
  4. Press or to select the desired value from the Missed Call field.
    If Enabled is selected, the message key LED flashes red when the handset misses a call.
    If Disabled is selected, the message key LED won’t flash when the handset misses a call.
  5. Press the Save soft key to accept the change or the Back soft key to cancel.

Note: When you press the Message key to view the missed calls or the received messages, the message key LED will go out.

 

Related Articles

- Yealink W52 Phone Settings Table, Article 3434