Original Article ID: 3471

SUMMARY

The purpose of this article is to show you how to use the Auto Ansewr feature on a Yealink W52

Scope

This article applies to:
Yealink W52

This article 
does not apply to:
Any other phones / devices

Feature

 

When auto answer feature is enabled, you can simply answer the incoming calls by picking up the handset from the charger cradle without having to press the off-hook key. The auto answer feature works only if the handset is placed in the charger cradle.


To configure auto answer via the handset:

  1. Press to enter the main menu.
  2. Select ->Telephony->Auto Answer.
  3. Press the Change soft key to check or uncheck the Auto Answer checkbox.

 

Related Articles

- Yealink W52 Phone Settings Table, Article 3434