Original Article ID: 3417

SUMMARY

The purpose of this article is to show you how to place calls with the yealink W52 Handset using the available call modes earpiece,speakerphone,headset.

Scope

This article applies to:
Yealink W52

This article 
does not apply to:
Any other phones / devices

Feature

You can use your handset to place an internal or external call. You can place a call using the following call modes:

  • Earpiece mode — pressing the off-hook key to dial out.

  • Speakerphone mode — pressing the speakerphone key to dial out.

  • Headset mode — connecting a headset.

 During the call, you can switch the call mode by pressing the corresponding keys or connecting a headset. You can cancel the dialing operation by pressing the on-hook key. During the call conversation, you can press the left and right navigation keys to adjust the volume of the currently engaged audio devices (earpiece, headset or loudspeaker). The call duration is displayed on the LCD screen while the call is in progress.

  

Internal Calls: 

 You can make internal calls between the handsets registered to the same base station. You can place an internal call to one handset or all handsets registered to the same base station.

To place an internal call to one handset via the handset:

1. Press to enter the main menu.

2. Select  .

The LCD screen displays all other registered handset names and the All HS option.

3. Press  or to highlight the desired handset name.

4. Press , , or the OK soft key to dial out.

 

To place an internal call to all handsets via the handset:

1. Press to enter the main menu.

2. Select .

The LCD screen displays all registered handset names and the All HS option.

3. Select All HS.

4. Press , , or the OK soft key to dial out.

All other subscribed handsets will ring simultaneously.

 

External Calls:

To place an external call via the handset, You can do one of the following:

1. Enter the desired number using the keypad.

2. Press , or  to dial out.

If there are multiple lines assigned to your handset as outgoing lines, press the Line soft key to select the desired line and then press  or the Dial soft key to dial out. If you do not select a line, the handset uses the default outgoing line to dial out.

 

To place a new call during an active call via the handset: (You can place at most two calls on your handset)

1. Press the Ext.Call soft key.(The active call is placed on hold.)

2. Enter the desired number in the Call To field using the keypad.

3. Press ,  or  to dial out.

 

RELATED LINKS

- Yealink W52 Cordless Call Features Table