Errors are related to the input/output connections between BFs. An Error List is populated after you perform a Check on your design, and is displayed in the Error List section located at the bottom of the screen. Any errors and/or warnings that exist in your design will be listed here after the check is complete.

Warnings (WRN) will appear in black text while Errors (ERR) will appear in red text. Errors must be cleared before you can Test and Deploy your application design. Scroll through the Error List using the scroll bar located to the right of the Error List. To hide the Error list click down arrow. To display the Error List click up arrow.

Warning Description
WRN: duplicated name in BF "X" on page "Y Indicates that you have more than one BF with the same name on the specified page.
Error Description
ERR: too few instances of "X" in project There are not enough of the specified instance in your design. Check your design and add more of the specified instance where required.
ERR: missing or invalid property "X" in BF "Y" on page "Z" The BF property is missing or invalid. Check the BF and add the missing or valid property.
ERR: there is a link out to an unexisting link in BF "X" on page "Y". The BF is linking out to a non-existent link in BF. Check the specified page and add the correct BF Link in.
ERR: invalid prompt () in BF "X" on page "Y" The BF prompt on the specified page is invalid. Check the invalid prompt and replace with a valid one.
ERR: undefined required property "X" in BF "Y" on page "Z" The BF property on the specified page is not defined. Define the specified BF property.
ERR: Too few input connections in BF "X" on page "Y" The BF on the specified page is missing one or more input connections. Check the BF and add the required number of connections.
ERR: Too few output connections in BF "X" on page "Y" The BF on the specified page is missing one or more output connections. Check the specified BF and add the required number of connections.
ERR: unconnected required terminal "X" in BF "Y" on page "Z" The required BF terminal on the specified page is not connected. Check the BF and add a connection to the correct BF terminal.
Field Description
INFO: Custom Setting "X" was created to "Y" on page "Z" Custom messages generated by the system. These can be changed using the Client Portal Application.
Note: Although these messages appear in the Error List, they are not errors.